IdeaRS.Connections.Data Namespace

Represents the attribute which describes the type of the interface, the wrapper and the parameter of the aggregated property format of the string is 'the name of the interface, the name of the wrapper, the name of the parameter'

Represents properties of the weld

Represents the data contract of the connection (the manufacturing sequence and connection parameters)

Represents an input parameters for command which cuts a beam by a beam

Represents an input parameters for command which cuts a beam by a beam, a plate or a workplane

Represents an input parameters for command which cuts an object by a plane

Represents properties of the fasteners

Represents data for the command which creates the generally located plate.

Represents data for the command which creates the gusset plate

Represents data for the command which creates the gusset plate

Data for Added meber on Steel member

Data for Cut of stiffening member positioned on Steel member

Data for cut of plate on steel member

Data for General weld on Steel member

Data for longitudinal (horizontal) stiffener on steel member

Data for opening on steel member

Data for vertical stiffener on steel member

Represents data for a command which creates an opening

Represents data for the command which creates plate wideners (or haunches)

Represents data for the command which creates the rib plate

Represents data for the command which creates the stiffener of the beam segment

Represents data for command which creates connecting plate on timber members

Represents data for command which creates gusset plate on timber members

Represents properties of the weld

A member can be connected to a newly created item or an exiting item

Represents a type of connection of two parts.

Represents the type of the cut

Represents the result of comparison of distances of two object from the same point

Defines mode of the position (origin) of internal forces

It represents orientation of the plate (or any other item) relative to its reference member

Represents types of the definition of placement of beam segments

Represents the codes of the initial shape of plate (before editing in shape editor)

Represents the surface of the plate

Represents types of methods of possible definitions of a plate size

Represents the code of the position