WallRect Properties |
The WallRect type exposes the following members.
Name | Description | |
---|---|---|
EccentricityZ |
Displacement in local axis Z
(Inherited from Element2D.) | |
Edges |
Lines of Element2D including edges, which are created by opening
(Inherited from Wall.) | |
ElementType |
Analysis type - shell, plate, wall
(Inherited from Element2D.) | |
GeometricRegion |
Geometry region of element2D
(Inherited from Element2D.) | |
GeomId |
Id representing geometrical parts of Detail
(Inherited from Wall.) | |
Height |
Height of wall
| |
Id |
Element Id
(Inherited from OpenElementId.) | |
InnerLines |
Inner lines of this region
(Inherited from Element2D.) | |
InnerPoints |
Inner points of this region
(Inherited from Element2D.) | |
InsertPoint |
Insert point 0 - 9
(Inherited from Wall.) | |
MasterComponent |
Master component
(Inherited from Wall.) | |
MasterPoint |
Master point 0 - 9
(Inherited from Wall.) | |
Material |
Material
(Inherited from Element2D.) | |
Name |
Name
(Inherited from Wall.) | |
Offset1 |
Offset horizontal top left
| |
Offset2 |
Offset horizontal top left
| |
Position |
Offset between MasterPoint and InsertPoint
If MasterPoint is null, position is from origin of coordinate system
(Inherited from Wall.) | |
Thickness |
Thicknes of Element2D
(Inherited from Element2D.) | |
Width |
Width of wall
|